Use the images you use in an online Marketplace play a crucial role in determining the sale. The name of the game is pictures and professional product shots equal or sales. So to get the most out of your product pictures show you how to build a light box in just a few easy steps. This lightbox will help you increase 
Sales by isolating your product from its background placing emphasis on its detail. 
We’ll also provide a well-lit environment for excellent camera exposure. So in order to build the sales increasing machine, we’re going to need to start with just a few things probably find around your house the cardboard box some white tissue paper a piece of white poster board. You’re going to need two light sources preferably with Louis and poles as far as tools go. You only need a box cutter or carpet covered.
A ruler or straight edge scissors tape and a Sharpie or marker Let’s begin. Shall we?
The first thing I want to do is grab my ruler and pan begin to Mark the guidelines on the box for the sections that will be cut out.
I’m drawing my guidelines that cut the sides out of the boxes. What do you see the width of the ruler just about an inch using a straight edge. This is about a good size to be of
The box one side of the Box blank as well as the bottom of the Box. All right now that I’ve drawn the squares on the three sides that I’m going to cut out. It’s time to cut them out. Now be careful here. It’s very hard to tighten listenings online.
Alright now that I’ve got my three labels in place.
So glossy and matte side you’re going to want to use the matte side facing out. So the reflective side doesn’t interfere with a camera flash. All right. Now as you can see the poster boards bigger than our box here as well.
Now that I’ve made my Mark I’m going to use my straight edge here to make it guidelines. So you can cut off the excess poster board with our scissors. Make this poster board a better size.
Get it inside. I have this nice curve now that I’ve got the poster board in all the way up to the top. Just going to go ahead and secure the very top of the piece of tape. So that that doesn’t slide down it going. There we go firmly in place. Now, it’s time to lay the tissue paper over the holes we cut in our box going to do is lay the tissue paper over the side that I wanted to be at once I’ve got the tissue paper here. Just going to take one piece of cake and I’ll take my scissors here. Just going to trim off the extra. Alright now that I’ve got it in place go ahead and secure this tissue paper white tape around the edges.
Doing the same thing for the other juicer. I’ve gotten to this stage where my three cut sides are tissue paper on something to keep in mind is this isn’t a fusing light as much as you might want it to will see that in the finished product. You can always add more layers of tissue paper.
My three sides ready to diffuse light go ahead and bring him away. And so
Some of this far side. I’ve got a clip white right here. Go ahead and clip this my table. And for this other side, I’ve got this little desktop lamp right here with Frank’s of the light end of this shit.
Keep in mind with your white Source next to the tissue paper. You want to make sure you turn it off walk away from your life box. All right. Let’s have some fun and try product shot with a robot. 